[1] B.R. Powell, P.E. Krajewski, A.A. Luo, Chapter 4 - Magnesium alloys for lightweight powertrains and
automotive structures, in: P.K.B.T.-M. Mallick Design and Manufacturing for Lightweight Vehicles (Second
Edition) (Ed.), Woodhead Publ. Mater., Woodhead Publishing, 2021: pp. 125–186.
https://doi.org/10.1016/B978-0-12-818712-8.00004-5.
[2] E. Aghion, B. Bronfín, F. Von Buch, S. Schumann, H. Friedrich, Newly developed magnesium alloys for
powertrain applications, JOM. 55 (2003) 30–33. https://doi.org/10.1007/s11837-003-0206-8.
[3] K. U. Kainer, Magnesium – Alloys and Technology, Wiley‐VCH Verlag GmbH & Co. KGaA, 2003.
https://doi.org/10.1002/3527602046.
[4] N.W. Ashcroft, N.D. Mermin, Solid State Physics, Cengage Learning, 2011.
https://books.google.com/books?id=x_s_YAAACAAJ.
[5] B.L. Mordike, T. Ebert, Magnesium: properties—applications—potential, Mater. Sci. Eng. A. 302 (2001)
37–45.
[6] S. Ramakrishnan, P. Koltun, Global warming impact of the magnesium produced in China using the
Pidgeon process, Resour. Conserv. Recycl. 42 (2004) 49–64. https://doi.org/10.1016/j.resconrec.2004.02.003.
[7] Y. Liu, D. Yu, Y. Zhang, J. Zhou, D. Sun, H. Li, Research advances on weldability of Mg alloy and other
metals worldwide in recent 20 years, J. Mater. Res. Technol. 25 (2023) 3458–3481.
https://doi.org/10.1016/j.jmrt.2023.06.184.
[8] H.R. Pouretedal, M.H. Roudashti, Thermal behavior of metallic fuel pyrotechnics of Al, Mg and alloy of
Al–Mg: a review, J. Therm. Anal. Calorim. 149 (2024) 12635–12650. https://doi.org/10.1007/s10973-024-
13800-6.
[9] A. Saberi, H.R. Bakhsheshi-Rad, A.F. Ismail, S. Sharif, M. Razzaghi, S. Ramakrishna, F. Berto, The
Effect of Co-Encapsulated GO-Cu Nanofillers on Mechanical Properties, Cell Response, and Antibacterial
Activities of Mg-Zn Composite, Metals (Basel). 12 (2022) 207. https://doi.org/10.3390/met12020207.
[10] J. Zhao, M. Haowei, A. Saberi, Z. Heydari, M.S. Baltatu, Carbon Nanotube (CNT) Encapsulated
Magnesium-Based Nanocomposites to Improve Mechanical, Degradation and Antibacterial Performances for
Biomedical Device Applications, Coatings. 12 (2022). https://doi.org/10.3390/coatings12101589.
[11] J. Liu, X. Wang, A. Saberi, Z. Heydari, The effect of Co-encapsulated GNPs-CNTs nanofillers on
mechanical properties, degradation and antibacterial behavior of Mg-based composite, J. Mech. Behav. Biomed.
Mater. 138 (2023) 105601. https://doi.org/10.1016/j.jmbbm.2022.105601.
[12] H. Zhang, A. Saberi, Z. Heydari, M.S. Baltatu, Bredigite-CNTs Reinforced Mg-Zn Bio-Composites to
Enhance the Mechanical and Biological Properties for Biomedical Applications, Materials (Basel). 16 (2023).
https://doi.org/10.3390/ma16041681.
[13] A. Saberi, M.S. Baltatu, P. Vizureanu, Recent Advances in Magnesium–Magnesium Oxide Nanoparticle
Composites for Biomedical Applications, Bioengineering. 11 (2024) 508.
https://doi.org/10.3390/bioengineering11050508.
[14] A. Saberi, M.S. Baltatu, P. Vizureanu, The Effectiveness Mechanisms of Carbon Nanotubes (CNTs) as
Reinforcements for Magnesium-Based Composites for Biomedical Applications: A Review, Nanomaterials. 14
(2024). 10.3390/nano14090756.
[15] T.M. Jeewandara, S.G. Wise, M.K.C. Ng, Biocompatibility of Coronary Stents, (2014) 769–786.
https://doi.org/10.3390/ma7020769.
[16] G.L. Song, A. Atrens, Corrosion Mechanisms of Magnesium Alloys, Adv. Eng. Mater. 1 (1999) 11–33.
https://doi.org/10.1002/(SICI)1527-2648(199909)1:1<11::AID-ADEM11>3.0.CO;2-N.
[17] F. Czerwinski, Controlling the ignition and flammability of magnesium for aerospace applications,
Corros. Sci. 86 (2014) 1–16. https://doi.org/10.1016/j.corsci.2014.04.047.
[18] Z. Fang, A. Saberi, M. Gheisari, W. Yao, Y. Chai, Fabrication and Characterization of New Hot Extruded
ZK60/CNTs+AgNPs Nanocomposites for Biomedical Applications, J. Mater. Res. Technol. 33 (2024) 6058–
6073. https://doi.org/10.1016/j.jmrt.2024.10.216.
[19] A. Saberi, H. Bakhsheshi-Rad, S. Abazari, A. Ismail, S. Sharif, S. Ramakrishna, M. Daroonparvar, F.
Berto, A Comprehensive Review on Surface Modifications of Biodegradable Magnesium-Based Implant Alloy:
Polymer Coatings Opportunities and Challenges, Coatings. 11 (2021) 747. 

[20] B. Istrate, C. Munteanu, M.S. Bălțatu, R. Cimpoeșu, N. Ioanid, Microstructural and Electrochemical
Influence of Zn in MgCaZn Biodegradable Alloys, Materials (Basel). 16 (2023).
https://doi.org/10.3390/ma16062487.
[21] B. Istrate, C. Munteanu, V. Geanta, S. Baltatu, S. Focsaneanu, K. Earar, Microstructural analysis of
biodegradable Mg-0.9Ca-1.2Zr alloy, IOP Conf. Ser. Mater. Sci. Eng. 147 (2016) 012033.
https://doi.org/10.1088/1757-899X/147/1/012033.
[22] I. Polmear, Light Alloys: From Traditional Alloys to Nanocrystals, Butterworth-Heinemann, 2005.
https://books.google.com/books?id=td0jD4it63cC.
[23] H.E. Friedrich, B.L. Mordike, Magnesium Technology: Metallurgy, Design Data, Applications, Springer
Berlin Heidelberg, 2006. https://books.google.com/books?id=2z4UrFgJ2mkC.
[24] A.S.M. International, Metals Handbook Vol. 2: Properties and Selection: Nonferrous Alloys and SpecialPurpose Materials, ASM, 1990. https://books.google.com/books?id=lHF1zgEACAAJ.
[25] A. Saberi, H.R. Bakhsheshi-Rad, E. Karamian, M. Kasiri-Asgarani, H. Ghomi, Magnesium-graphene
nano-platelet composites: Corrosion behavior, mechanical and biological properties, J. Alloys Compd. 821
(2020). https://doi.org/10.1016/j.jallcom.2019.153379.
[26] A. Saberi, H.R. Bakhsheshi-Rad, E. Karamian, M. Kasiri-Asgarani, H. Ghomi, A study on the corrosion
behavior and biological properties of polycaprolactone/ bredigite composite coating on biodegradable Mg-ZnCa-GNP nanocomposite, Prog. Org. Coatings. 147 (2020) 105822.
https://doi.org/10.1016/j.porgcoat.2020.105822.
[27] A. Saberi, H.R. Bakhsheshi-Rad, E. Karamian, M. Kasiri-Asgarani, H. Ghomi, M. Omidi, S. Abazari,
A.F. Ismail, S. Sharif, F. Berto, Synthesis and Characterization of Hot Extruded Magnesium-Zinc NanoComposites Containing Low Content of Graphene Oxide for Implant Applications, Phys. Mesomech. 24 (2021)
486–502. https://doi.org/10.1134/S1029959921040135.
[28] M.P. Staiger, A.M. Pietak, J. Huadmai, G. Dias, Magnesium and its alloys as orthopedic biomaterials: A
review, Biomaterials. 27 (2006) 1728–1734. https://doi.org/10.1016/j.biomaterials.2005.10.003.
[29] A.A. Luo, Magnesium casting technology for structural applications, J. Magnes. Alloy. 1 (2013) 2–22.
https://doi.org/10.1016/j.jma.2013.02.002.
[30] J.H. Westbrook, Metallurgical and Chemical Applications of Intermetallics, MRS Bull. 21 (1996) 37–43.
https://doi.org/10.1557/S0883769400035491.
[31] M. Fathollahi, H. Behnejad, A comparative study of thermal behaviors and kinetics analysis of the
pyrotechnic compositions containing Mg and Al, J. Therm. Anal. Calorim. 120 (2015) 1483–1492.
https://doi.org/10.1007/s10973-015-4433-3.
[32] S. Housh, B. Mikucki, A. Stevenson, Selection and Application of Magnesium and Magnesium Alloys,
Prop. Sel. Nonferrous Alloy. Spec. Mater. 2 (1990) 0. https://doi.org/10.31399/asm.hb.v02.a0001074.
[33] H. Shao, L. He, H. Lin, H. Li, Progress and trends in magnesium‐based materials for energy‐storage
research: a review, Energy Technol. 6 (2018) 445–458.
[34] J. Tan, S. Ramakrishna, Applications of Magnesium and Its Alloys: A Review, Appl. Sci. 11 (2021).
https://doi.org/10.3390/app11156861.
[35] A. Yamashita, Z. Horita, T.G. Langdon, Improving the mechanical properties of magnesium and a
magnesium alloy through severe plastic deformation, Mater. Sci. Eng. A. 300 (2001) 142–147.
https://doi.org/10.1016/S0921-5093(00)01660-9.
[36] R.I. Stephens, A. Fatemi, R.R. Stephens, H.O. Fuchs, Metal Fatigue in Engineering, Wiley, 2000.
https://books.google.mw/books?id=B2aAPVa1TloC.
[37] A. Vinogradov, Effect of severe plastic deformation on tensile and fatigue properties of fine-grained
magnesium alloy ZK60, J. Mater. Res. 32 (2017) 4362–4374. https://doi.org/10.1557/jmr.2017.268.
[38] L. Dobrzanski, T. Tomasz, Č. L, J. Domagała-Dubiel, Mechanical properties and wear resistance of
magnesium casting alloys, J. Achiev. Mater. Manuf. Eng. 31 (2008).
[39] L. Liu, L. Xiao, D.L. Chen, J.C. Feng, S. Kim, Y. Zhou, Microstructure and fatigue properties of Mg-tosteel dissimilar resistance spot welds, Mater. Des. 45 (2013) 336–342.
https://doi.org/10.1016/j.matdes.2012.08.018.
[40] S. Agarwal, J. Curtin, B. Duffy, S. Jaiswal, Biodegradable magnesium alloys for orthopaedic
applications: A review on corrosion, biocompatibility and surface modifications, Mater. Sci. Eng. C. 68 (2016)
948–963. https://doi.org/10.1016/j.msec.2016.06.020.
[41] R. ZENG, J. ZHANG, W. HUANG, W. DIETZEL, K.U. KAINER, C. BLAWERT, W. KE, Review of
studies on corrosion of magnesium alloys, Trans. Nonferrous Met. Soc. China. 16 (2006) s763–s771.
https://doi.org/10.1016/S1003-6326(06)60297-5.
[42] Z. LIU, J. NIE, Y. ZHAO, Effect of deformation processing on microstructure evolution and mechanical
properties of Mg−Li alloys: A review, Trans. Nonferrous Met. Soc. China. 34 (2024) 1–25.
https://doi.org/10.1016/S1003-6326(23)66379-4.
[43] B.B. Buldum, A. Sık, İ. Ozkul, No Title, Int. J. Electron. Mech. Mechatronics Eng. 2 (2012) 261–268.

[44] H.T. Jeong, W.J. Kim, Critical review of superplastic magnesium alloys with emphasis on tensile
elongation behavior and deformation mechanisms, J. Magnes. Alloy. 10 (2022) 1133–1153.
https://doi.org/10.1016/j.jma.2022.02.009.
[45] C. Do Lee, Effect of grain size on the tensile properties of magnesium alloy, Mater. Sci. Eng. A. 459
(2007) 355–360. https://doi.org/10.1016/j.msea.2007.01.008.
[46] S.D. Cramer, B.S. Covino, A.S.M.I.H. Committee, Corrosion: Fundamentals, Testing and Prevention,
ASM International, 2003. https://books.google.rs/books?id=Qqr4oAEACAAJ.
[47] H. Somekawa, S. A., T. and Mukai, Fracture mechanism of a coarse-grained magnesium alloy during
fracture toughness testing, Philos. Mag. Lett. 89 (2009) 2–10. https://doi.org/10.1080/09500830802537718.
[48] F.-Z. Teng, Magnesium BT - Encyclopedia of Geochemistry: A Comprehensive Reference Source on the
Chemistry of the Earth, in: W.M. White (Ed.), Springer International Publishing, Cham, 2018: pp. 853–856.
https://doi.org/10.1007/978-3-319-39312-4_327.
[49] S. Li, X. Yang, J. Hou, W. Du, A review on thermal conductivity of magnesium and its alloys, J. Magnes.
Alloy. 8 (2020) 78–90. https://doi.org/10.1016/j.jma.2019.08.002.
[50] H. Pan, F. Pan, R. Yang, J. Peng, C. Zhao, J. She, Z. Gao, A. Tang, Thermal and electrical conductivity of
binary magnesium alloys, J. Mater. Sci. 49 (2014) 3107–3124. https://doi.org/10.1007/s10853-013-8012-3.
[51] C. Wang, Z. Dong, B. Jiang, Z. Zheng, S. Wu, J. Song, A. Zhang, J. Xu, B. Yang, C. Zheng, F. Pan,
Lowering thermal expansion of Mg with the enhanced strength by Ca alloying, J. Mater. Res. Technol. 24 (2023)
1293–1303. https://doi.org/10.1016/j.jmrt.2023.03.042.
[52] T. Wu, K. Zhang, Corrosion and Protection of Magnesium Alloys: Recent Advances and Future
Perspectives, Coatings. 13 (2023). https://doi.org/10.3390/coatings13091533.
[53] A.L. Oppedal, E.K. Haitham, T. C.N., V. Sven C., M.F. and Horstemeyer, Anisotropy in hexagonal closepacked structures: improvements to crystal plasticity approaches applied to magnesium alloy, Philos. Mag. 93
(2013) 4311–4330. https://doi.org/10.1080/14786435.2013.827802.
[54] H. Zhang, H. Wang, J. Wang, J. Rong, M. Zha, C. Wang, P. Ma, Q. Jiang, The synergy effect of fine and
coarse grains on enhanced ductility of bimodal-structured Mg alloys, J. Alloys Compd. 780 (2019) 312–317.
https://doi.org/10.1016/j.jallcom.2018.11.229.
[55] Y. Nakai, M. Saka, H. Yoshida, K. Asayama, S. Kikuchi, Fatigue crack initiation site and propagation
paths in high-cycle fatigue of magnesium alloy AZ31, Int. J. Fatigue. 123 (2019) 248–254.
https://doi.org/10.1016/j.ijfatigue.2019.02.024.
[56] A. Dey, K.M. Pandey, Wear behaviour of Mg alloys and their composites – a review, 109 (2018) 1050–
1070. https://doi.org/10.3139/146.111707.
[57] H. Hu, X. Nie, Y. Ma, Corrosion and Surface Treatment of Magnesium Alloys, in: F. Czerwinski (Ed.),
IntechOpen, Rijeka, 2014. https://doi.org/10.5772/58929.
[58] K.-H. Kim, J.H. Hwang, H.-S. Jang, J.B. Jeon, N.J. Kim, B.-J. Lee, Dislocation binding as an origin for
the improvement of room temperature ductility in Mg alloys, Mater. Sci. Eng. A. 715 (2018) 266–275.
https://doi.org/10.1016/j.msea.2018.01.010.
[59] R. Zare, H. Sharifi, M.R. Saeri, M. Tayebi, Investigating the effect of SiC particles on the physical and
thermal properties of Al6061/SiCp composite, J. Alloys Compd. 801 (2019) 520–528.
https://doi.org/10.1016/j.jallcom.2019.05.317.
[60] H. Sharifi, K. Ostovan, M. Tayebi, A. Rajaee, Dry sliding wear behavior of open-cell Al-Mg/Al2O3 and
Al-Mg/SiC-Al2O3 composite preforms produced by a pressureless infiltration technique, Tribol. Int. 116 (2017)
244–255. https://doi.org/10.1016/j.triboint.2017.07.023.
[61] M. Tayebi, S. Nategh, H. Najafi, A. Khodabandeh, Tensile properties and microstructure of ZK60/SiCw
composite after extrusion and aging, J. Alloys Compd. 830 (2020) 154709.
https://doi.org/10.1016/j.jallcom.2020.154709.
[62] H. Sharifi, V. Eidivandi, M. Tayebi, A. Khezrloo, E. Aghaie, Effect of SiC particles on thermal
conductivity of Al-4%Cu/SiC composites, Heat Mass Transf. Und Stoffuebertragung. 53 (2017) 3621–3627.
https://doi.org/10.1007/s00231-017-2073-9.
[63] Y. Wang, M. Tayyebi, M. Tayebi, M. Yarigarravesh, S. Liu, H. Zhang, Effect of whisker alignment on
microstructure, mechanical and thermal properties of Mg-SiCw/Cu composite fabricated by a combination of
casting and severe plastic deformation (SPD), J. Magnes. Alloy. 11 (2023) 966–980.
https://doi.org/10.1016/j.jma.2022.11.004.
[64] M. Tayebi, H. Najafi, S. Nategh, A. Khodabandeh, Creep behavior of ZK60 alloy and ZK60/SiCw
composite after extrusion and precipitation hardening, Met. Mater. Int. 27 (2021) 3905–3917.
https://doi.org/10.1007/s12540-020-00877-5.
[65] H. Choi, Overview of silicon carbide power devices, (n.d.).
[66] W.J. Choyke, G. Pensl, Physical Properties of SiC, MRS Bull. 22 (1997) 25–29.
https://doi.org/10.1557/S0883769400032723.
[67] A. Das, S.P. Harimkar, Effect of Graphene Nanoplate and Silicon Carbide Nanoparticle Reinforcementon Mechanical and Tribological Properties of Spark Plasma Sintered Magnesium Matrix Composites, J. Mater.
Sci. Technol. 30 (2014) 1059–1070. https://doi.org/10.1016/j.jmst.2014.08.002.
[68] M. Subramani, S.-J. Huang, K. Borodianskiy, Effect of SiC Nanoparticles on AZ31 Magnesium Alloy,
Materials (Basel). 15 (2022). https://doi.org/10.3390/ma15031004.
[69] S. Liu, Y. Wang, M. Yarigarravesh, M. Tayyebi, M. Tayebi, Evaluation of whisker alignment and
anisotropic mechanical properties of ZK60 alloy reinforced with SiCw during KOBO extrusion method, J.
Manuf. Process. 84 (2022) 344–356. https://doi.org/10.1016/j.jmapro.2022.10.012.
[70] J. Shen, W. Yin, Q. Wei, Y. Li, J. Liu, L. An, Effect of ceramic nanoparticle reinforcements on the
quasistatic and dynamic mechanical properties of magnesium-based metal matrix composites, J. Mater. Res. 28
(2013) 1835–1852. https://doi.org/10.1557/jmr.2013.16.
[71] E. Guo, S. Shuai, D. Kazantsev, S. Karagadde, A.B. Phillion, T. Jing, W. Li, P.D. Lee, The influence of
nanoparticles on dendritic grain growth in Mg alloys, Acta Mater. 152 (2018) 127–137.
https://doi.org/10.1016/j.actamat.2018.04.023.
[72] W. Zhao, S.-J. Huang, Y.-J. Wu, C.-W. Kang, Particle Size and Particle Percentage Effect of AZ61/SiCp
Magnesium Matrix Micro- and Nano-Composites on Their Mechanical Properties Due to Extrusion and
Subsequent Annealing, Metals (Basel). 7 (2017). https://doi.org/10.3390/met7080293.
[73] S.-J. Huang, M. Subramani, A.N. Ali, D.B. Alemayehu, J.-N. Aoh, P.-C. Lin, The Effect of Micro-SiCp
Content on the Tensile and Fatigue Behavior of AZ61 Magnesium Alloy Matrix Composites, Int. J. Met. 15
(2021) 780–793. https://doi.org/10.1007/s40962-020-00508-0.
[74] P. Nasker, A.K. Mondal, SiC nanoparticles additions to squeeze-cast Mg-5.0Al-2.0Ca-0.3Mn alloy: An
evaluation of microstructure and mechanical properties, Mater. Charact. 212 (2024) 113984.
https://doi.org/10.1016/j.matchar.2024.113984.
[75] N. Faisal, D. Kumar, A. Kumar, A.K. Ansu, A. Sharma, A.K. Jain, M.Q. Alkahtani, T.M. Yunus Khan,
N. Almakayeel, Experimental Analysis for the Performance Assessment and Characteristics of Enhanced
Magnesium Composites Reinforced with Nano-Sized Silicon Carbide Developed Using Powder Metallurgy,
ACS Omega. 9 (2024) 5230–5245. https://doi.org/10.1021/acsomega.3c05089.
[76] H.Z. Ye, X.Y. Liu, Review of recent studies in magnesium matrix composites, J. Mater. Sci. 39 (2004)
6153–6171. https://doi.org/10.1023/B:JMSC.0000043583.47148.31.
[77] K.B. Nie, X.J. Wang, X.S. Hu, L. Xu, K. Wu, M.Y. Zheng, Microstructure and mechanical properties of
SiC nanoparticles reinforced magnesium matrix composites fabricated by ultrasonic vibration, Mater. Sci. Eng.
A. 528 (2011) 5278–5282. https://doi.org/10.1016/j.msea.2011.03.061.
[78] G. Cao, J. Kobliska, H. Konishi, X. Li, Tensile Properties and Microstructure of SiC Nanoparticle–
Reinforced Mg-4Zn Alloy Fabricated by Ultrasonic Cavitation–Based Solidification Processing, Metall. Mater.
Trans. A. 39 (2008) 880–886. https://doi.org/10.1007/s11661-007-9453-6.
[79] Z. Zhang, D.L. Chen, Consideration of Orowan strengthening effect in particulate-reinforced metal matrix
nanocomposites: A model for predicting their yield strength, Scr. Mater. 54 (2006) 1321–1326.
https://doi.org/10.1016/j.scriptamat.2005.12.017.
[80] H. Ahmadian, T. Zhou, A. Alansari, A.S. Kumar, A. Fathy, M. Elmahdy, Q. Yu, G. Weijia,
Microstructure, mechanical properties and wear behavior of Mg matrix composites reinforced with Ti and nano
SiC particles, J. Mater. Res. Technol. 31 (2024) 4088–4103. https://doi.org/10.1016/j.jmrt.2024.07.125.
[81] K. Ponhan, K. Tassenberg, D. Weston, K.G.M. Nicholls, R. Thornton, Effect of SiC nanoparticle content
and milling time on the microstructural characteristics and properties of Mg-SiC nanocomposites synthesized
with powder metallurgy incorporating high-energy ball milling, Ceram. Int. 46 (2020) 26956–26969.
https://doi.org/10.1016/j.ceramint.2020.07.173.
[82] H. Choi, H. Konishi, X. Li, Effects of Silicon Carbide Nanoparticles on Mechanical Properties and
Microstructure of As-Cast Mg-12wt.% Al-0.2wt.% Mn Nanocomposites BT - Magnesium Technology 2011, in:
W.H. Sillekens, S.R. Agnew, N.R. Neelameggham, S.N. Mathaudhu (Eds.), Springer International Publishing,
Cham, 2016: pp. 447–452. https://doi.org/10.1007/978-3-319-48223-1_84.
[83] V.D. Sartika, A.Z. Syahrial, The Role of Nano-SiC on Characteristics of Mg-Al-Sr/Nano-SiC Composites
Produced by Stir Casting Route, IOP Conf. Ser. Mater. Sci. Eng. 622 (2019) 12014.
https://doi.org/10.1088/1757-899X/622/1/012014.
[84] S. Ganguly, A.K. Mondal, Influence of SiC nanoparticles addition on microstructure and creep behavior
of squeeze-cast AZ91-Ca-Sb magnesium alloy, Mater. Sci. Eng. A. 718 (2018) 377–389.
https://doi.org/10.1016/j.msea.2018.01.131.
[85] Y.-Y. Wang, C. Jia, M. Xu, M. Kaseem, M. Tayebi, Microstructural changes caused by the creep test in
ZK60 alloy reinforced by SiCp at intermediate temperature after KOBO extrusion and aging, Materials (Basel).
16 (2023) 3885. https://doi.org/10.3390/ma16103885.
[86] H. Ferkel, B.L. Mordike, Magnesium strengthened by SiC nanoparticles, Mater. Sci. Eng. A. 298 (2001)
193–199. https://doi.org/10.1016/S0921-5093(00)01283-1.
[87] P. Monish, K.K.L. Hari, K. Rajkumar, Manufacturing and characterisation of magnesium composites
reinforced by nanoparticles: A review, Mater. Sci. Technol. 39 (2023) 1858–1876.

[88] C.-P. Li, Y.-Q. Li, C.-F. Li, H.-Y. Chen, Y.-L. Ma, Effect of SiC on Microstructure and Mechanical
Properties of Nano-SiC/Mg-8Al-1Sn Composites, J. Mater. Eng. Perform. (2024).
https://doi.org/10.1007/s11665-024-09372-z.
[89] J.-Y. Ren, G.-C. Ji, H.-R. Guo, Y.-M. Zhou, X. Tan, W.-F. Zheng, Q. Xing, J.-Y. Zhang, J.-R. Sun, H.-Y.
Yang, F. Qiu, Q.-C. Jiang, Nano-Enhanced Phase Reinforced Magnesium Matrix Composites: A Review of the
Matrix, Reinforcement, Interface Design, Properties and Potential Applications, Materials (Basel). 17 (2024).
https://doi.org/10.3390/ma17102454.
[90] S. Bemanifar, M. Rajabi, S.J. Hosseinipour, Microstructural Characterization of Mg-SiC Nanocomposite
Powders Fabricated by High Energy Mechanical Milling, Silicon. 9 (2017) 823–827.
https://doi.org/10.1007/s12633-017-9570-9.
[91] S. Kamrani, D. Penther, A. Ghasemi, R. Riedel, C. Fleck, Microstructural characterization of Mg-SiC
nanocomposite synthesized by high energy ball milling, Adv. Powder Technol. 29 (2018) 1742–1748.
https://doi.org/10.1016/j.apt.2018.04.009.
[92] F. Rahimi Mehr, S. Kamrani, C. Fleck, M. Salavati, Optimal Performance of Mg-SiC Nanocomposite:
Unraveling the Influence of Reinforcement Particle Size on Compaction and Densification in Materials
Processed via Mechanical Milling and Cold Iso-Static Pressing, Appl. Sci. 13 (2023).
https://doi.org/10.3390/app13158909.
[93] D. Penther, C. Fleck, A. Ghasemi, R. Riedel, S. Kamrani, Development and Characterization of Mg-SiC
Nanocomposite Powders Synthesized by Mechanical Milling, Key Eng. Mater. 742 (2017) 165–172.
https://doi.org/10.4028/www.scientific.net/KEM.742.165.
[94] C. Suryanarayana, N. Al-Aqeeli, Mechanically alloyed nanocomposites, Prog. Mater. Sci. 58 (2013) 383–
502. https://doi.org/10.1016/j.pmatsci.2012.10.001.
[95] S. El-Eskandarany, Mechanical Alloying For Fabrication of Advanced Engineering Materials, 2001.
[96] S. Vijayabhaskar, T. Rajmohan, T.K. Vignesh, H. Venkatakrishnan, Effect of nano SiC particles on
properties and characterization of Magnesium matrix nano composites, Mater. Today Proc. 16 (2019) 853–858.
https://doi.org/10.1016/j.matpr.2019.05.168.
[97] Z. WANG, X. WANG, Y. ZHAO, W. DU, SiC nanoparticles reinforced magnesium matrix composites
fabricated by ultrasonic method, Trans. Nonferrous Met. Soc. China. 20 (2010) s1029–s1032.
https://doi.org/10.1016/S1003-6326(10)60625-5.
[98] A. Matin, F.F. Saniee, H.R. Abedi, Microstructure and mechanical properties of Mg/SiC and AZ80/SiC
nano-composites fabricated through stir casting method, Mater. Sci. Eng. A. 625 (2015) 81–88.
https://doi.org/10.1016/j.msea.2014.11.050.
[99] A.S. Kang, R.P. Singh, S. Singla, Investigating nano-SiC reinforced WE43 magnesium matrix surface
composites, Eng. Res. Express. 6 (2024) 25409. https://doi.org/10.1088/2631-8695/ad4196.
[100] M. Deepan, C. Pandey, N. Saini, M.M. Mahapatra, R.S. Mulik, Estimation of strength and wear
properties of Mg/SiC nanocomposite fabricated through FSP route, J. Brazilian Soc. Mech. Sci. Eng. 39 (2017)
4613–4622. https://doi.org/10.1007/s40430-017-0757-1.
[101] K. Sun, Q.Y. Shi, Y.J. Sun, G.Q. Chen, Microstructure and mechanical property of nano-SiCp reinforced
high strength Mg bulk composites produced by friction stir processing, Mater. Sci. Eng. A. 547 (2012) 32–37.
https://doi.org/10.1016/j.msea.2012.03.071.
[102] A. Sadooghi, K. Rahmani, Experimental study on mechanical and tribology behaviors of Mg-SiC
nano/micro composite produced by friction stir process, J. Mech. Sci. Technol. 35 (2021) 1121–1127.
https://doi.org/10.1007/s12206-021-0225-9.
[103] M. Narvan, R. Abdi Behnagh, N. Shen, M.K. Besharati Givi, H. Ding, Shear compaction processing of
SiC nanoparticles reinforced magnesium composites directly from magnesium chips, J. Manuf. Process. 22
(2016) 39–48. https://doi.org/10.1016/j.jmapro.2016.01.010.